| Home | Shorter Wheels | More Storage | Wooden Screen Door | Interior Shelving | 12V Power Source |
| Water Pump | Scissor Jacks | Bike Rack | Add-A-Room | Emily |
Gord100's Trillium - 12V Water Pump for Fawcet
Here we have a 12 volt electric pump for the trailer sink! The water comes from our water tank which is stored under the rear seat (bed). You can buy a kit and get the pump, fawcet and switch from your local trailer accessories stores.
If you have any questions or would like to know more, you can find me back at the Boler website, and contact me, "Gord100".
Here we have a 12 volt electric pump for the trailer sink! The water comes from our water tank which is stored under the rear seat (bed). You can buy a kit and get the pump, fawcet and switch from your local trailer accessories stores.
If you have any questions or would like to know more, you can find me back at the Boler website, and contact me, "Gord100".
 Notice the red switch. Its called a 'maintain switch' that comes with the pump. Its behaviour acts like this: Push once, pump comes on. Push again, pump goes off. |
 Notice the two white water hoses. The bottom is the water intank (from the tank) and the other goes up to the sink's fawcet. Also notice the white and red wires. The red that comes from the pump is connected white wire from the 12V DC Power Source. The black wire from the pump is connected to the switch. The remaining black wire from the switch is connected the black wire from my 12V DC Power Source (notice power source has black and white wires.) You need to secure the pump to something. In my trailer, theres a piece of wood that makes a good brace. |
 This is a rough schematic, but all hookup instructions comes with the pump kit: |